Censtar Diesel Exhaust Fluid Filling Equipment (AdBlue Filling Machine)
- AdBlue Filling Machine type
- Censtar single-nozzle AdBlue filling dispenser for vehicles
- Censtar three-nozzle diesel-adblue filling dispenser
- Filling dispenser + 1M3(IBC) container
- Filling dispenser + 3M3container
- Filling dispenser + 10 / 20M3 buried container
Description
Censtar single-nozzle AdBlue filling dispenser for vehicles
• Explosion-proof structure design conforming to refueling machine standard
• Emergency stop switch on both sides of the filling machine for emergencies
• Single-nozzle type, measuring accuracy of complete machine: ± 0.3%, maximum flow rate: 40L / min
• Overall dimensions: 500mmx550mmxl650mm (width x thickness x height)
• With the same control system as the refueling machine, it supports filling in fixed amount, quantitative or non-quantitative filling. Filling modes can be selected through the keyboard, which is convenient for customers to operate.
• It supports 1C card, cash payment, ticket printer, voice prompt / intercom (optional)
• It can record the volume and amount of each transaction, and inquire historical data
• It can be directly connected to the zero pipe system of group customers to realize data upload and remote inquiry.
• It is applicable to the service of AdBlue filling at the fuel station, and it is placed close to the refueling machine, and take power from the adjacent refueling machine.
Censtar three-nozzle diesel-adblue filling dispenser
• Explosion-proof structure design conforming to refueling machine standard
• Emergency stop switch on both sides of the diesel-urea filling machine for emergencies
• Three-nozzle type, measuring accuracy of complete machine ± 0.3%, maximum flow rate 40L / min
• Overall dimension: 900mmx550mmx2380mm (width x thickness x height)
• With the same control system as the refueling machine, it supports filling in fixed amount, quantitative or non-quantitative filling. Filling modes can be selected through the keyboard, which is convenient for customers to operate.
• It supports 1C card, cash payment, ticket printer, voice prompt / intercom
• It can record the volume and amount of each transaction, and inquire historical data
• It can be directly connected to the zero pipe system of group customer
Parameter
Filling dispenser + 1M3(IBC) container
The filling machine is skid-mounted with the container, which occupies a small area and is easy to install
Low level alarm
Anti-idling protection function
Installation requirements: AC 220V power supply, 1 piece of TCP / IP communication network line
Operating temperature range: -11 ℃ ~ 55 ℃
Applicable to fuel stations and special fleets (public transportation / postal service / sanitation) with sales of vehicle urea below 5 tons / month, etc
Refueling mode: replace the IBC container as a whole
Filling dispenser + 3M3 container
Double-layer container, sun-proof, dust-proof, leak-proof, advertising wall, it can double as an advertising wall
Volume of the container: 3 cubic meters (3 tons)
The container is equipped with a special submersible pump, liquid level meter, high level alarm meter and liquid level display, and a complete set of domestic refueling system.
The filling machine and the container can be skid-mounted in one piece or arranged separately
Installation requirements: AC 220V power supply, 1 piece of TCP / IP communication network line
Operating temperature range: -25 ℃ ~ 55 ℃
Applicable to fuel stations and large fleets with sales of vehicle adblue 5~10 tons / month, etc
Refueling mode: extracting from 1000L container
Filling dispenser + 10 / 20M3 buried container
10M³FF double-layer container
Good anti-freezing and heat preservation effect, large capacity, low allocated transportation cost
Single-nozzle filling machine and refueling machine can be placed side by side to complete filling of diesel and adblue at one time
Diesel-AdBlue all-in-one machine may also be used to maintain the original image of the fuel station.
Imported special submersible pump and vehicle adblue liquid level meter are adopted, and independent external liquid discharging port is set up
Installation requirements: AC 220V power supply, 1 piece of TCP / IP communication network line
Operating temperature range: -30 ℃ ~ 55 ℃
Applicable to fuel stations with sales of vehicle adblue over 10 tons / month, etc
Refueling mode: extracting from 1000L container or tank car
Technical Parameters of Diesel Exhaust Fluid Filling Equipment
Ambient temperature | -25 ℃ ~ 55 ℃ | Humidity | ≤ 95% |
| Power adaptability | AC 220 V (+ 10%, -15%) 50Hz or AC 380 VAC 50 Hz (+ 10%, -15%) 50Hz | Noise | ≤ 80d B |
| Motor | 1000W (or 750W) | Applicable medium | Urea |
| Flow range | (5 ~ 40) L / min | ||
| The measured (min.) | 5 L | Error | ≤ ± 0.3% |
| Explosion-proof grade | Intrinsically safe and explosion-proof, explosion-proof sign ExibdmeIIAt3 | Ambient pressure | 86 ~ 110k Pa |
| Measuring range | Unit price: 0 ~ 99. 00 yuan / L; Preset range: 0 ~ 9999. 00 yuan; Measuring range for single refueling: amount 0 ~ 9999.00 yuan; volume 0 ~ 42949672.95L; Measuring range for accumulative refueling: amount 0 ~ 42949672.95 yuan; volume: 0 ~ 42949672.95 L | ||
Related Products
Related Cases
Inquiry
Thank you for your interest in Censtar. If you want to learn more about our Gas station equipment, Contact us Now to find out what we can do for you !
Our Products
Contact Us
- Email: [email protected]
- Tel: +86-371-67989006
- Whatsapp: +86-18703719006
- Address: Zhengzhou,China
Copyright © 2024 Censtar Science & Technolgy Corp., Ltd.All Rights Reserved.